Guides
Appliance guides for Bengaluru homes
What an error code means, what Bengaluru's water does to your appliances, what a spare part should cost, and what to check before you pay anyone to visit. The prices match our charges page, and the water figures cover every area we serve.
Six things worth reading before you book
Each guide links to the repair page for the appliances it covers.
What your appliance's error code means
What a code means, and which ones you can clear yourself.
Read thisBengaluru's hard water, and what it does to your appliances
Water hardness area by area, and what it does to each appliance.
Read thisWhen an appliance is worth repairing, and when it is not
The age and cost points where replacing beats repairing.
Read thisSix things worth checking before you call anyone
Six free checks, none longer than ten minutes.
Read thisSpare parts, and the questions worth asking
Part grades, fitted prices and the questions to ask.
Read thisWhere to find the model number, appliance by appliance
Where the rating plate is on each of the eight appliances.
Read thisWhich one you need
Start from the problem you have.
- There is a code on the display and you do not know what it means. Start with the error code guide. The two commonest codes on a washing machine, the drain code and the inlet code, are often a blocked filter or a silted inlet gauze, which takes about ten minutes and costs nothing. The code narrows it down; it does not name the part.
- It still works, but not properly, and you suspect the water. Water hardness changes a lot from one Bengaluru ward to the next. The hard water guide gives the hardness area by area, and what it does to a geyser element, a washing machine heater and an RO purifier's membrane.
- You have a quote and you cannot tell whether to pay it. Repair or replace sets out the one-third rule and the price points where a new machine wins.
- It has just stopped and you have not called anyone yet. Try the six checks first. None takes more than ten minutes, and any one of them can fix the problem outright.
- A technician has named a part and you want to know what to ask. Spare parts covers OEM-compatible against manufacturer-channel, what each costs, and the warranty question worth asking before anything is fitted.
- You are being asked for a model number and cannot find it. The model number guide says where the rating sticker hides on each appliance, and why the number changes what a repair costs.
None of the guides asks you to book anything. If one of them solves the problem, you owe us nothing.
Common appliance problems, answered
Why is my fridge not cooling when the freezer is still cold?
Because the fridge section is cooled by air blown down from the freezer, so anything that stops that airflow warms the fridge while the freezer stays cold. Check first that food is not packed against the vent at the back and that the door gasket seals all round. If the fan behind the freezer wall has gone quiet, or ice is building on the back panel, the evaporator fan or the defrost system has failed and it needs a visit. A common refrigerator repair runs ₹299 to ₹2,399.
My AC is running but the room is not getting cold. What is wrong?
It is most often choked filters or a dusty coil, then a failed capacitor that stops the outdoor unit, then low gas from a leak. Rinse the filters and set the remote to Cool first. If the indoor unit blows but the outdoor fan stays still, it is usually the capacitor, and a common AC repair runs ₹349 to ₹2,399.
My microwave runs but does not heat. Can I fix it myself?
No. A microwave that lights up and turns but leaves food cold has a fault in the high-voltage circuit: the magnetron, the diode, the capacitor or a door switch. The capacitor can hold a dangerous charge for days after the microwave is unplugged, so this is not a home repair. A common microwave repair runs ₹449 to ₹1,499; a new magnetron is quoted separately.
Why does my front-load washing machine smell?
It is usually detergent and softener residue, a damp fold in the door gasket, or dirty water sitting behind a blocked drain filter. Clean the drain filter at the bottom front with a towel and a tray under it, wipe the gasket fold dry, leave the door open between washes and run an empty wash at the hottest setting. If it still smells after two cycles, the sump or the drain pump is holding water.
My geyser keeps tripping the MCB. Is it safe to use?
No. Switch it off at the MCB and leave it off. A geyser that trips the breaker usually has an element that has scaled and failed, or wiring that has broken down, and resetting it repeatedly is how a small fault becomes a burnt one. A new 2 kW element is ₹1,299 to ₹3,199 fitted; a wiring or cut-out fault is in the ₹639 to ₹1,599 common band of geyser repair.
My washing machine will not drain. What should I check first?
Check the drain filter first, then the drain hose. A coin, a hairclip or lint in the filter is the commonest cause and costs nothing to clear; a kinked or blocked hose is next. If both are clear and the pump hums without moving water, the drain pump has failed. The error code guide explains what the drain code on your display means.
We repair all major appliance brands
We repair every make out of warranty, across Bengaluru. Tap yours to book.
Still not working? Book now, pay after the job.
Tell us what it is doing and we will tell you what it usually is, and what it usually costs, before anyone comes out.





