Parts

Spare parts, and the questions worth asking

Before anyone fits a spare part in your appliance, ask which part it is, what grade it is, whether the price is fitted, and what warranty it carries. This guide explains those terms and gives the fitted prices of eight common parts.

By Kaif Sharieff, Fixit BLR · published · reviewed

Technician fitting a heating element in an OTG, the old one on a cloth

Three grades of part

  • Manufacturer-channel parts are bought through the brand's own distribution. For out-of-warranty work, independent repairers cannot always get them. Where one is available for your model, the quote should name it with its part number and price it separately.
  • OEM-compatible parts are made for the spares trade to fit and work in place of the original part. Almost every independent repairer in Bengaluru fits these, and so do we.
  • Local equivalents are cheaper, and their quality varies widely. On capacitors, heating elements and boards, the difference in how long they last can show within a year.

We fit OEM-compatible parts by default and name the exact part before it goes in. We do not call them manufacturer parts, because they are not. On anything mains-powered, an ISI mark means the part is certified against an Indian Standard. The standards and the licence lookup are published by the Bureau of Indian Standards.

What common parts cost, fitted

A fitted price is the part plus the labour to install it, which is what you actually pay. These figures match the charges page, which lists more parts.

Fitted prices for eight of the most commonly replaced appliance parts in Bengaluru
PartApplianceFitted price
Drain pumpWashing machine₹1,199 to ₹3,199
Door interlockWashing machine₹899 to ₹2,199
Compressor, conventional, single doorRefrigerator₹3,199 to ₹4,499
Suction motor, entry to mid classChimney₹2,099 to ₹3,499
Run capacitor, compressor or fanAC₹599 to ₹1,499
MagnetronMicrowave₹1,899 to ₹3,199
Heating element, 2 kWGeyser₹1,299 to ₹3,199
RO membrane, 75 to 100 GPDWater purifier₹1,799 to ₹4,199

Each part is a range because the same part varies by brand and model. Anyone who quotes a single figure over the phone, before seeing the appliance, is guessing.

Five questions to ask before a part is fitted

  1. Which part, exactly? Ask for its name and, where there is one, its part number. “The board” is not an answer.
  2. What grade is it? Manufacturer-channel, OEM-compatible or a local equivalent, as above.
  3. What is the warranty on the part, and on the labour? Ours is 180 days on parts we supply and 90 days on labour. They are different numbers because a part and the work of fitting it fail for different reasons.
  4. Can I see the old part? The answer should always be yes. We leave it with you.
  5. Is that price fitted? A part price and a fitted price are different numbers. Ask which one you have been given.

How long a part takes

Common parts such as pumps, valves, belts, interlocks, elements and thermostats are usually on the van or available the same day. Brand-coded purifier membranes are the exception and usually take a few working days. Boards and model-specific assemblies are ordered: 2 to 4 working days is realistic for most, and up to ten for an imported or less common model. A part for a model discontinued eight or ten years ago can take longer or may not be available, and we tell you if so. We do not fit a part that only nearly fits. The model number decides all of this, so photograph the rating plate before you call: here is where to find it.

How to check a part is new

  1. Ask to see the part in its packaging before it goes in.
  2. Check the part number on the box or label matches the one on your quote.
  3. Check the packaging has not been opened and sealed again.
  4. Look at the part itself: there should be no dust, scorch marks or corrosion on its terminals.

A part that arrives loose in a plain bag with no number on it is worth questioning before anyone fits it, whoever is fitting it.

Keep the old part

Ask for the part that came out. It is yours, it costs nothing to keep, and it is the simplest proof that something was replaced. A failed geyser element usually shows heavy scale or a split sheath. A failed magnetron often has a scorched cap on its antenna. A worn drum bearing feels rough and gritty when you turn it by hand. If you do not want the old part, it can be taken away for disposal, but that should be your choice.

What an ISI mark tells you

On some parts the ISI mark matters. A power cord, a plug or a switch for a high-wattage appliance such as an oven or a geyser should carry it. The mark, issued under BIS standards, says the part was made for that load, and a part without it should not be fitted. The mark does not tell you whether a part fits your model, or whether it is the manufacturer's own part. The part number on the quote answers those questions.

Questions

Are these company parts, or local ones?

We fit OEM-compatible parts by default, sold through the spares trade, and we name the exact part before it goes in. Where a manufacturer part is available for your model we quote it alongside, and we tell you when it is not. Independent repairers cannot always get manufacturer-channel parts for out-of-warranty work, so ask anyone who promises one for the part number and the packaging. Parts we supply carry 180 days of warranty.

What warranty do I get, and on what?

You get 180 days on the parts we supply, except consumables such as filters and belts, and 90 days on our labour. If the same fault comes back within those periods, we return at no charge and with no second visit fee. A different fault on the same appliance is a new job, and it is quoted as one.

How long does an ordered part take?

Pumps, valves, belts, interlocks, elements and thermostats are usually fitted the same or the next day, because they are on the van. Boards and model-specific assemblies are ordered and take 2 to 4 working days for most models, and up to ten for an imported or less common one. For a model discontinued eight or ten years ago it can take longer, or the part may not exist any more, and we tell you so.

Can I buy the part myself and have you fit it?

Yes. You pay for the labour only, and the 90-day labour warranty still applies. The 180-day part warranty does not, because we did not supply the part. If it turns out to be the wrong part for your model, the visit fee, from ₹299, still applies. Send us the model number first and we will confirm the part before you order it.

Pages that go with this

We repair all major appliance brands

We repair every make out of warranty, across Bengaluru. Tap yours to book.

Still not working? Book now, pay after the job.

Tell us what it is doing and we will tell you what it usually is, and what it usually costs, before anyone comes out.

Book a repair

A person calls you back within 10 minutes.

1Which appliance? Tap one
2What is wrong? Tap one
3Where do we call you?
  • Visit from ₹299, taken off your repair bill if you go ahead
  • Pay after the repair
  • No advance, no OTP

Your details are used to arrange your repair. Privacy

Not sure what it is? Send a photo on WhatsApp