Washing machine repair in Bengaluru, at your door.
Repairs start at ₹299, and a repair at that price costs ₹299 in total, visit included. You pay from ₹299 for the visit, and we deduct that charge from your repair bill when you go ahead with the repair. We repair front load, top load and semi-automatic machines.
The technician finds the fault first and prices the repair before any work. Most front-load drain pump and door lock faults are fixed on the first visit, because those parts travel on the van.
Borewell and tanker water leaves scale on the drum, the heater and the inlet mesh. A service clears it, so the machine fills, heats and drains properly again.
The drum and tub descaled, which hard water furs up
Drain filter, inlet mesh, drawer and door seal cleaned
Front load, top load, fully automatic and semi-automatic washing machine repair
We repair front loaders, top loaders and semi-automatic washing machines at home. Tell us which one you have, and the technician brings the parts that type uses.
Front load washing machine repair
The drum turns on two bearings and the door seals with a rubber gasket. Grinding on spin points to the bearings, and water under the door to the gasket or a choked drain filter.
The tub hangs on suspension rods while a pulsator or agitator washes. A machine that shakes across the floor usually has worn rods, and one that fills but will not wash needs the belt, the clutch or the motor checked.
These are front and top loaders that run a whole program on their own, controlled by a board and sensors. When one stops halfway or shows an error code, we read the code first.
A semi-automatic has two tubs, each with its own timer and motor, and you fill the water by hand. Faults are mostly mechanical, and parts are easy to find.
LG, Samsung and other inverter machines run a brushless motor from an inverter board. A weak spin or a motor code needs the motor, its sensor and the board tested together.
LG and Samsung washing machine repair, and every other make
Any model year is fine, in or out of warranty. If your brand is not listed here, we still repair it.
LG washing machine service and repair
LG front loaders turn the drum with a direct-drive inverter motor and no belt, so a spin fault is usually the motor's sensor, the bearings or the board. Display codes: OE drain, IE water inlet, UE unbalanced load, dE door.
Samsung machines run a Digital Inverter motor. On most models 4C or 4E means water supply, 5C or 5E drain, UB or UE an unbalanced load and dC or dE the door, which tells us what to bring.
Washing machine was not draining properly. Called Fixit and technician came same day evening. He checked everything and fixed the problem. Good service.
SMShabana M.BTM Layout · Washing machine★ 5.0
Had issue with front load washing machine, it was stopping in between. Person came and checked properly, explained what was problem and then repaired it. Working fine now.
AKArun KumarMarathahalli · Washing machine★ 5.0
Good experience with Fixit BLR. Technician was on time and did not directly tell me to replace expensive parts. He checked first and found a smaller issue. Reasonable charges also.
NRNandini RaoWhitefield · Washing machine★ 5.0
My washing machine started making lot of noise suddenly. Booked service and the technician came next day. Bearing problem was there and he explained everything before doing the work. Overall good.
IImranFrazer Town · Washing machine★ 4.0
Service was good and fast. Machine was having water leakage from bottom. Technician checked and got it repaired in the same visit.
Messages customers sent us after a washing machine repair.
Tap what your machine is doing to see the usual cause, the fix and what it costs. A major part is named and priced before it is fitted.
Water left in the drum, will not drain
UsuallyChoked drain filter; coin in the impeller; kinked hose; failed pump
FixClear filter and hose; replace pump if it hums but will not turn
Cost₹399 to ₹3,199
Spins, but clothes come out soaking
UsuallyA drain fault first; unbalanced load; not level; worn shock absorbers; belt
FixClear drain, level the machine, or replace dampers or belt
Cost₹0 to ₹3,499
Not filling, filling slowly, or an inlet code on a full tap
UsuallyA part-closed tap; silted inlet mesh (hard water furs it in a year here); low building pressure; failed inlet valve
FixOpen the tap fully; clean the mesh and hose; replace the inlet valve if the coil is open
Cost₹0 to ₹1,599
Door will not open
UsuallyWater still in the drum; safety delay; failed door interlock; child lock
FixForce-drain through the filter; replace the interlock if failed
Cost₹0 to ₹2,199
Water on the floor
UsuallyPerished hose seal; loose clamp; torn door gasket; overflowing drawer
FixHose seals and clamps at the cheap end; gasket or pump at the mid end
Cost₹299 to ₹6,499
Grinding or rumbling on spin
UsuallyCoin or underwire between drum and tub (cheapest); worn drum bearing
FixRetrieve the object, or replace bearing and seal set
Cost₹599 to ₹6,499
All 13 washing machine faults and their costs
Bad smell, black slime on the rubber ring
UsuallyDetergent overdosing in hard water, cold washes, door kept shut
FixDeep clean and descale; replace gasket if mould is into the rubber
Cost₹799 to ₹6,499
Completely dead, no lights
UsuallySocket or MCB; door switch; surge-damaged board
FixSupply checks first; board repair where possible
Cost₹299 to ₹9,799
Error code, stops mid-cycle
UsuallyDepends on the code; many are inlet or drain faults
FixRead the code first (table below)
Costfrom ₹299 to ₹9,799
Water not heating
UsuallyScaled or open-circuit element; failed NTC sensor
FixReplace element and descale, or replace sensor
Cost₹1,199 to ₹3,499
Semi-auto: spin tub hums, will not turn
UsuallyFailed capacitor; seized motor; worn brake shoe or coupler
FixReplace capacitor, coupler or brake shoe
Cost₹399 to ₹2,399
Shakes violently, walks across the floor
UsuallyNot level; transit bolts never removed; broken suspension
FixLevel the feet, remove bolts, or replace dampers
Cost₹0 to ₹2,199
Black specks on the wash, or a smell from the drawer
UsuallyMould in the detergent drawer and its housing, and in the door gasket fold on a front load
FixDrawer and housing stripped and cleaned, gasket fold cleaned, drawer replaced if the seal is perished
Cost₹0 to ₹1,399
A cost that starts at ₹0 means you can usually sort it out yourself, for free. If a technician visits, you pay at least the visit charge, from ₹299, even when the fix costs less. It is the minimum charge. On a bigger repair it is part of the repair price and is not added again.
Parts
Washing machine parts we replace
Each price covers the part and the labour to fit it. The technician tells you which part it is before it goes in.
Fitted prices for 12 parts
Common washing machine parts, fitted
Part
Fitted price
Notes
Drain pump
₹1,199 to ₹3,199
Most common replacement on front loads
Door interlock
₹899 to ₹2,199
A wear item on older machines
Water inlet valve
₹699 to ₹1,599
Single or 2-way as fitted
Pressure / level switch
₹599 to ₹1,199
Often mistaken for a board fault
Drive belt
₹299 to ₹899
Top load, semi-auto, belt-driven front loads
Shock absorbers (set)
₹899 to ₹2,199
Replaced as a set, never singly
Heating element
₹719 to ₹2,499
Scales and fails early on hard water
Gearbox / clutch
₹1,499 to ₹4,499
Semi-automatic and top load
Drum bearing + oil seal kit
₹2,499 to ₹6,499
A full strip-down; we say if the machine is worth it
Door gasket
₹1,999 to ₹6,499
Model-specific; usually a 2 to 4 day part
Main control board
₹949 to ₹9,799
Board-level repair first; usually a third of replacement
Drive motor
₹1,699 to ₹7,199
Brushed, direct-drive or BLDC by model
What the code on your display meansLG, Samsung, IFB
What the code on your display means
Code
Brand
Meaning
Usual fix
IE / 4E / E1 / P10
LG · Samsung · IFB
Water inlet: the drum did not fill in time
Tap, hose kink, or the inlet mesh. Often free
OE / 5E / E2 / P11
LG · Samsung · IFB
Outlet: could not empty in time
Drain filter, then the pump
UE / dC / E3
LG · Samsung · IFB
Unbalanced load; usually not a fault
Redistribute and level. Usually free
E4 / dE / DOOR
IFB · LG · Samsung
Door not latched, or interlock failed
Check for trapped laundry, then the interlock
E5 / HE
IFB · LG
Heating circuit: element or sensor
Replace the element or NTC sensor
E9 / LE
IFB · Samsung
Leak detected in the base
Stop using it and call
AC HI / AC LO
IFB
Mains voltage outside the safe window
A supply problem; a stabiliser usually solves it
TACO / 3E
IFB · Samsung
Motor speed sensor
Replace the tacho sensor, sometimes the motor
Your water is probably why it failedhardness by area
Yes, a technician can come the same day. Drain pumps and door interlocks for the common front loads travel on the van, so those faults are usually fixed on that first visit.
Do you service and repair LG, Samsung and Bosch washing machines?
Yes. We repair and service LG, Samsung and Bosch washing machines out of warranty, and IFB, Whirlpool, Godrej, Haier, Panasonic and Siemens machines too, whether front load, top load or semi-automatic. Tell us the brand and model when you book, and the technician brings the parts it is likely to need.
What is the difference between a washing machine service and a repair?
A service is routine care: the drum and filter are cleaned, hard-water scale is removed, and the hoses, belt and door seal are checked. A repair fixes a fault, such as a machine that will not drain, spin or start. Book a service when the machine smells or washes poorly, and a repair when something has stopped working.
Can you fix a front load washing machine's door lock or gasket at home?
Yes. The technician replaces a front load machine's door lock or door gasket at your home, and does drain pump, PCB and drum bearing repairs there too. A drum bearing job takes longer because the drum has to come out, and you are told that before the work starts.
Do you install washing machines?
Yes. We install washing machines and take them out, including when you move flats. The technician fits the inlet and drain hoses, removes the transit bolts on a new front loader and runs a test wash.
Do I pay the visit fee as well as the repair?
No. The visit, with the diagnosis, costs from ₹299. If you go ahead with the repair, the visit charge is taken off the repair bill. If you say no to the price, you pay only for the visit.
How much does washing machine repair cost in Bengaluru?
A common washing machine repair costs ₹299 to ₹2,199, and the visit charge, from ₹299, is counted inside that price, so a ₹299 repair costs ₹299 in total, visit included. A major repair costs ₹2,499 to ₹9,799 with the part included.
Can you repair a washing machine that is still under warranty?
Yes, if you want us to. A repair under the maker's warranty is free from the brand, so it is worth calling them first, and our work can end that cover. We repair every brand, in or out of warranty.
Are you affiliated with any manufacturer?
No. We are independent and multi-brand, and not anyone’s authorised centre, agent or dealer.
What if my washing machine is not worth fixing?
Then you pay only the visit fee, from ₹299. If the repair would cost more than about a third of a comparable new machine, we tell you that replacing it makes more sense.
Do you fit original washing machine parts, or local ones?
We fit OEM-compatible parts by default, and we name the exact part before it goes in. Where a manufacturer part is obtainable for your model we quote it alongside, and we say when it is not. Parts we supply carry a 180-day warranty.
How long does a spare part take?
Pumps, valves, belts, interlocks and elements are usually same or next day. Door gaskets, boards and model-specific parts take two to four working days. We say which at diagnosis.
Talk to a person
Washing machine stopped? A technician can come today.
A person calls you back within 10 minutes, day or night. Nothing is paid in advance, and nobody asks you for an OTP.